The WilsonPro 4000 is a wall-mounted, four-amplifier system designed for office buildings, warehouses, hospitals, hotels, campuses, and other large facilities. One WilsonPro 4000 will cover 100,000 to 140,000 square feet, with support for 16 or more inside broadcast antennas (depending on outside signal strength).
The WilsonPro 4000 automatically controls the four built-in amplifiers with its on-board software, and adjusts the gain level for each port independently, up or down, as needed. Any one amplifier port can reduce its gain to prevent oscillation without decreasing coverage to the other three ports. And with Wilson's XDR (eXtended Dynamic Range) technology, the 4000 will never overpower or shut down.
Also unique to the WilsonPro 4000 is its color LCD screen and D-pad navigation controller, which allows installers and administrators to monitor and adjust the gain of the various cellular frequencies the 4000 supports.
Using Wilson Electronics' patented SmarTech III® technology, the WilsonPro 4000 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office through four individual ports. This allows you to stay connected in areas where cell service is poor, or where your office's building materials interfere with signals from the local cell tower.
The WilsonPro 4000 works with all major wireless carriers, including Verizon, AT&T, T‑Mobile, Sprint, U.S. Cellular, and most others.
In a large building, office, or warehouse, you'll get the best results and performance from a WilsonPro 4000 with a custom design and professional installation.
Working with your floor plans, Powerful Signal's design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal's professional installer will have knowledge of local building codes, and have the proper tools and experience to make sure your system is set up and configured correctly.
…or contact us online. We can design a custom cellular amplification system that will solve your reception and connectivity problems at the best possible price point. We've designed thousands of cell signal amplifier systems; let us create one for you!
Properly installing and configuring a WilsonPro 4000 is complex task, and we strongly advise a custom solution (see above). If you prefer to purchase a WilsonPro 4000 as a standalone product, without design and installation, the kit comes with the following components:
A building cell phone signal amplifier system is made up of four major components:
The cell phone signal amplifier—sometimes called a booster—is the core component of the system.
The amplifier is bi-directional: It amplifies both the signal your phone receives from the tower and the signal your phone sends to the tower. A weak cell signal is received by the outside antenna and amplified by the booster; the strengthened signal is then rebroadcasted by the inside antenna to your phone. The amplifier also boosts the connection back to the cell tower. (There still has to be some cell signal for the booster to amplify, though; it cannot “multiply zero”).
The most convenient spot to place the cell phone signal amplifier is in an I.T. closet, network box, attic, or garage; this will keep it out of sight, but still accessible if you need to make any changes to the system. The location you select to install the amplifier needs to have a 110-volt AC wall outlet nearby (typically within 6 feet) to plug in the amplifier’s power supply.
The four parts above are all that’s required for a complete cell phone signal amplifier system. Other components can protect or enhance a system:
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note: The four largest carriers (Verizon, AT&T, T-Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.
If you have any questions, please contact Powerful Signal.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty InformationAll WilsonPro products are protected by WilsonPro's 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. WilsonPro Signal Boosters are warranted for three (3) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option, either repair or replace the product. WilsonPro will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S. This warranty does not apply to any Signal Booster determined by WilsonPro to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.