The weBoost eqo cell phone signal booster (pronounced "echo") provides maximum power for the best possible cellular reception in a single room or office. Stay connected with the strongest cell signal, and experience fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in areas with weak cell service and in buildings that block outside cell signal.
Using Wilson Electronics' patented SmarTech III® technology, the eqo receives the outside cell signal, amplifies it, and rebroadcasts it inside the room. This allows you to stay connected in areas where cell service is poor, or where your home's building materials interfere with signals from the local cell tower. (See the "More Information" tab for details.)
The weBoost eqo works with all major wireless carriers in the U.S. and Canada.
The eqo is designed to amplify cellular transmissions inside a single small room or office.
It is Wilson Electronics' strongest one-room booster. The amount of square footage it covers depends on the strength of the signal it receives from the cell tower. In general, the stronger the outside cell signal, the greater the interior broadcast distance.
You can expect the eqo to cover a room the size of an office or workroom (less than 100 square feet).
Please contact us if you have any questions about coverage for this booster.
You can install the weBoost eqo yourself in minutes. It does not require climbing on your roof or pulling cables through walls. (See the "More Information" tab, or click here to view the installation instructions in the user manual.)
This is a complete kit, with everything you need to start getting the best signal in your home.
The eqo phone signal booster system is made up of three major components:
The cell phone signal booster—sometimes called an amplifier—is the core component of the system. In the weBoost eqo, the booster also contains an outside antenna in the same unit.
The booster is bi-directional: It amplifies both the signal your phone receives from the tower and the signal your phone sends to the tower. A weak cell signal is received by the outside antenna and amplified by the booster; the strengthened signal is then rebroadcast by the inside antenna to your phone. The amplifier also boosts the connection back to the cell tower.
A high-quality weBoost booster from Wilson Electronics has very high receiver sensitivity, meaning it can process a weaker cell signal than your phone by itself. There still has to be some cell signal for the booster to amplify, though (it cannot "multiply zero").
You should place your eqo booster in the area of the room with the strongest cell phone signal. Often this will be by a window, but it may also be in another location (the instruction manual includes directions on how to fine where the strongest signal is). Place the booster with the back of the unit (the matte black panel with kickstand) facing the closest/strongest cell tower, and the front of the unit (the glossy black panel, with LED light) facing the room.
The location you choose for the booster needs to have a 110-volt AC wall outlet within 6 feet for the power supply.
Starting April 2017, the eqo also includes an optional outside donor antenna. Instead of using the booster's internal antenna, you can attach the small outside antenna, place it in a windowsill between the window and the screen, and attach it to the booster with a 6-foot cable (included). The outside antenna has a flat leader cable that will run under your closed window.
The inside antenna communicates with cell phones in the room. It is a directional panel antenna that broadcasts its signal forward, away from the antenna, in a cone shape. It can be placed on any flat surface or mounted on a wall.
You'll need to place the inside antenna in a location in the room where it meets all of the following criteria:
If the inside antenna is too close to or pointing toward the booster, the two units may conflict with each other (a condition known as oscillation), which will cause the amplifier to shut itself off.
A 25-foot length of RG58 coax cable connects the booster to the inside antenna. The SMA-male connectors at both ends of the cable easily attach to the SMA-female connectors on the booster and the inside antenna.
Download the Wilson weBoost 474120 user guide for more details.
If you need help setting up your weBoost eqo, please feel free to contact us and we'll be happy to assist you.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note: The four largest carriers (Verizon, AT&T, T-Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.
If you have any questions, please contact Powerful Signal.
Warranty InformationweBoost signal boosters and kits are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. See reseller warranty procedures. Signal boosters and kits may also be returned directly to the manufacturer at the consumer's expense, with a dated proof of purchase and a returned material authorization (RMA) number supplied by weBoost. weBoost shall, at its option, either repair or replace the product. weBoost will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S. This warranty does not apply to any signal boosters or kits determined by weBoost to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Failure to use a surge-protected AC power strip with at least a 1000 Joule rating will void your warranty. All weBoost products that are packaged with other weBoost accessory products are intended for resale and use as a single unit, and such product kits are required to be sold to the end user or subsequent reseller as packaged. The "de-kitting" and sale as a standalone product of any one or more components of such a product kit is in violation of weBoost's warranty. No "de-kitted" product will be eligible for return for any reason. The sale of separate, not-kitted cable, antennas, and other accessories is allowed and fully warranted.