The Connect RV 65 cell phone signal booster improves cellular reception for RVs and fifth wheels that are parked. Whether at an RV resort, a remote national park, or mountain getaway, the Connect RV 65 system will help you stay connected, with faster 4G data and fewer dropped calls, undelivered texts, and missed email messages.
* With −100 dBm (about 1 bar) of outside signal, the Connect RV 65 booster can cover around 1,000 square feet, providing improved cellular coverage throughout most or all of your rig. Less outside signal will reduce the total coverage amount, but will still make phone, text, and data available closer to the inside antenna (as long as outside signal isn’t effectively zero).
Using Wilson Electronics' patented SmarTech III® technology, the Connect RV 65 receives the outside cell signal, amplifies it, and rebroadcasts it inside your RV. This allows you to stay connected in areas where cell service is poor. (See the "More Information" tab for details.)
The weBoost Connect RV 65 works with all major wireless carriers, including Verizon, AT&T, T-Mobile, Sprint, U.S. Cellular, and most others.
You can install the weBoost Connect RV 65 yourself in about 30 minutes. (Click here to view the installation instructions in the user manual.)
Alternatively, you can have a professional install your booster system at additional cost. Please contact us and we'll put you in touch with an installer in your area.
This is a complete kit, with everything you need to start getting the best signal in your RV.
A cell phone signal amplifier system for large areas is made up of four major components:
The cell phone signal amplifier—sometimes called a booster—is the core component of the system.
The amplifier is bi-directional: It amplifies both the signal your phone receives from the tower and the signal your phone sends to the tower. A weak cell signal is received by the outside antenna and amplified by the booster; the strengthened signal is then rebroadcasted by the inside antenna to your phone. The amplifier also boosts the connection back to the cell tower. (There still has to be some cell signal for the booster to amplify, though; it cannot “multiply zero”).
The most convenient spot to place the cell phone signal amplifier is in an I.T. closet, network box, attic, or garage; this will keep it out of sight, but still accessible if you need to make any changes to the system. The location you select to install the amplifier needs to have a 110-volt AC wall outlet nearby (typically within 6 feet) to plug in the amplifier’s power supply.
The four parts above are all that’s required for a complete cell phone signal amplifier system. Other components can protect or enhance a system:
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note: The four largest carriers (Verizon, AT&T, T-Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.
If you have any questions, please contact Powerful Signal.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty InformationweBoost signal boosters and kits are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. See reseller warranty procedures. Signal boosters and kits may also be returned directly to the manufacturer at the consumer's expense, with a dated proof of purchase and a returned material authorization (RMA) number supplied by weBoost. weBoost shall, at its option, either repair or replace the product. weBoost will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S. This warranty does not apply to any signal boosters or kits determined by weBoost to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Failure to use a surge-protected AC power strip with at least a 1000 Joule rating will void your warranty. All weBoost products that are packaged with other weBoost accessory products are intended for resale and use as a single unit, and such product kits are required to be sold to the end user or subsequent reseller as packaged. The "de-kitting" and sale as a standalone product of any one or more components of such a product kit is in violation of weBoost's warranty. No "de-kitted" product will be eligible for return for any reason. The sale of separate, not-kitted cable, antennas, and other accessories is allowed and fully warranted.