Wilson Pro 70 PLUS Cell Signal Booster - 1 to 3 Dome Antennas - 463327R Refurbished: Kit

Wilson Pro 70 PLUS Cell Signal Booster - 1 to 3 Dome Antennas - 463327R Refurbished

(No reviews yet)
In stock—fast shipping!
  • FREE rooftop antenna mount included
  • Your choice of 1–3 inside dome antennas
  • Supports a larger number of simultaneous users
  • Graphical signal meter
  • Commercial-grade components
  • Boost both voice & 4G data
  • Works with all major cellular carriers

$1,099.99 $999.99 Sale
SKU: 463327R
Free Shipping
Powerful Signal has been in business over 10 years Powerful Signal is Wilson Electronics' most experienced partner Powerful Signal offers lifetime support on all systems it sells Powerful Signal offers nationwide installation

Product Description

Wilson Pro 70 PLUS Refurbished Cell Phone Signal Booster System (1–3 Dome Antennas) 463327R


  • Best-in-class coverage area.
  • Carrier agnostic: Works with all major cellular carriers.
  • Boosts 4G LTE and 3G service for voice, text, and data.

  • Graphical uplink and downlink power meter.
  • Boosts cell signal in small offices for multiple users.
  • Includes commercial-grade antennas and coax cables.

The Wilson Pro 70 PLUS is a single- or multi-antenna system for small offices, large homes, or other buildings that need improved cell signal reception and have high user demands. The Pro 70 PLUS improves both voice and data to reduce dropped calls and missed emails and texts, keeping your business and employees connected with a stronger cell signal.

This kit includes one to three inside dome antenna that sends amplified signal to the phones in your building.

Who is this for?

  • Those who have heavy cellular user and data loads.
  • Those who frequently experience dropped calls, undelivered text, or slow 4G data.
  • Small offices in remote locations with weak cell service.
  • Small offices in urban locations with building materials that block outside cell signal (steel, glass, concrete, plaster, etc.).
  • Small offices below ground level, and other places where cell reception is poor.

What is a refurbished WilsonPro cellular booster?

WilsonPro refurbished cell signal boosters were purchased by customers who returned them to Wilson Electronics, the manufacturer. These systems may have been used briefly or may not have been used at all.

Wilson Electronics has inspected and tested each cell signal booster system to ensure that it's in good working order and replaced any damaged or non-working components with new, working ones. The booster or its components may have cosmetic blemishes from a previous installation.

WilsonPro refurbished units are backed by Wilson Electronics' 30-day money-back guarantee and are warranted for one year against defects in workmanship and/or materials.

How it works

Using Wilson Electronics' patented SmarTech III® technology, the Wilson Pro 70 PLUS receives the outside cell signal, amplifies it, and rebroadcasts it inside your office. This allows you to stay connected in areas where cell service is poor, or where your office's building materials interfere with signals from the local cell tower. (See the "More Information" tab for details.)

Works with all major cellular carriers

The WilsonPro 70 PLUS works with all major wireless carriers, including Verizon, AT&T, T-Mobile, Sprint, U.S. Cellular, and most others.

How much area will this product cover?

The following chart is based on open interior space with no obstructions (walls, doors, etc.). Drywall, plaster, wood, concrete, steel, and stone all affect radio transmissions. Cell phones also operate in several different frequencies that penetrate obstructions differently. In general, the stronger the outside cell signal, the greater the inside broadcast distance. Please contact us if you have any questions about coverage for this booster.

Outside signal strength
1 antenna
2 antennas
3 antennas
Weak (−100 dBm)
Up to 2,500 sq ft
Nᴏᴛ ʀᴇᴄᴏᴍᴍᴇɴᴇᴅ
Nᴏᴛ ʀᴇᴄᴏᴍᴍᴇɴᴇᴅ
Moderate (−90 dBm)
Up to 12,000 sq ft
Up to 7,000 sq ft
Up to 8,000 sq ft
Strong (−80 dBm)
Up to 20,000 sq ft
Up to 30,000 sq ft
Up to 40,000 sq ft

These coverage area estimates have been calculated from industry standards and Powerful Signal's years of experience installing cellular amplification systems. Powerful Signal considers any figures from other retailers that exceed these to be inaccurate and unrealistic.

Package includes

This is a complete kit, with everything you need to start getting the best signal in your office or other large building.

  • 1 × Wilson Pro 70 PLUS 463327R refurbished cell phone signal booster.
  • 1 × AC wall outlet power supply.
  • 1 × wide-band outdoor omni antenna.
  • 1–3 × wide-band indoor dome antenna(s).
  • 1 × 75' 400 coax cable (connects outdoor antenna to booster).
  • 1–3 × 60' 400 coax cable(s) (connect booster to indoor antenna/antennas).
  • 1 × BONUS universal adjustable roof mount (for outdoor antenna).
  • 1 × lightning surge protector.
  • 1–2 × 2' 400 coax jumper cable(s).
  • 1 × 2-way or 3-way 50-ohm splitter (if needed, depending on antenna configuration).
  • Wilson Pro 70 PLUS 463327 install guide.

How does a building cell phone signal booster work?

A building cell phone signal amplifier system is made up of four major components:

  1. A cell phone signal amplifier and power supply.
  2. An outside donor antenna.
  3. An inside broadcast antenna.
  4. Coax cables that connect the antennas to the amplifier.

Cell phone signal amplifier

The cell phone signal amplifier—sometimes called a booster—is the core component of the system.

The amplifier is bi-directional: It amplifies both the signal your phone receives from the tower and the signal your phone sends to the tower. A weak cell signal is received by the outside antenna and amplified by the booster; the strengthened signal is then rebroadcasted by the inside antenna to your phone. The amplifier also boosts the connection back to the cell tower. (There still has to be some cell signal for the booster to amplify, though; it cannot “multiply zero”).

The most convenient spot to place the cell phone signal amplifier is in an I.T. closet, network box, attic, or garage; this will keep it out of sight, but still accessible if you need to make any changes to the system. The location you select to install the amplifier needs to have a 110-volt AC wall outlet nearby (typically within 6 feet) to plug in the amplifier’s power supply.

Directional and omnidirectional antennas

Donor antennas: directional (left) and omnidirectional (right).

Outside donor antenna

The donor antenna communicates with your wireless carrier’s cell tower. It’s typically mounted on a pole on the roof of the building, clear of any surrounding obstacles.

Some donor antennas are directional, meaning they need to be pointed toward the strongest nearby cell tower. Typically you’ll choose a directional antenna if your building is in a remote location with one distant cell tower providing weak outside signal.

An omnidirectional antenna picks up signals from multiple cell towers in different directions. Usually you’ll choose an omni antenna if your building is in an area with several surrounding towers, and especially if you have plenty of outside cell signal that just isn’t penetrating inside your building.

The outside antenna needs to be placed with adequate separation from the inside antenna(s), and, if you’re using a directional antenna, not pointing toward your inside antenna(s) so their signals overlap. Without adequate separation, the outside and inside antennas may conflict with each other (a condition known as oscillation), which will cause the amplifier to reset or shut itself off.

For more information about choosing the right donor antenna, see our blog entry, “Directional or omnidirectional: Which antenna is best?

Panel and dome antennas

Broadcast antennas: panel (left) and dome (right).

Inside broadcast antenna

The broadcast antenna communicates with cell phones inside the building. It’s typically mounted on a ceiling or a wall.

A dome antenna is mounted on the ceiling, and broadcasts its signal downward in a 360° pattern. Domes work best in situations where the ceiling is level with the floor (not angled), low enough to be reached with a ladder, and where there is access above the ceiling to attach coax cable to the antenna. Domes typically provide the best signal coverage, and are also less noticeable than panel antennas.

A panel antenna is mounted on a wall, and broadcasts its signal forward, away from the panel, in a beam 60–70° wide. Panels work best in situations where a dome antenna is not easy to install or would not be horizontal to the floor, or where pulling cable through walls and ceilings is not an option. Panels can be concealed in recessed areas behind drywall.

Basic cell phone signal amplifier kits usually include one broadcast antenna. Larger, more complex buildings with custom-designed systems have multiple inside broadcast antennas that cover more area.

400, RG6, and RG58 coax cable

Terminated coax cable: 400 cable with N-connector (left), RG6 cable with F-connector (middle), RG58 cable with SMA-connector (right).

Coax cable

Lengths of coax cable connect the donor antenna and the broadcast antenna(s) to the cell phone signal amplifier.

Any signal sent through a cable is going to result in attenuation (signal loss). Since the objective of installing a cell phone signal amplifier system is to increase signal, the length and type of cable in the system is an important consideration.

Commercial and large-home systems use 400-type coax cable or plenum coax cable, terminated with N-connectors. These cables are very thick and have very low signal loss, which makes them ideal for long runs from the amplifier to the antenna (sometimes hundreds of feet). They are, however, very rigid, so they’re not well-suited for use around corners and in tight spaces. These types of cables are often used by professional installers.

Small home amplifier systems typically use RG6 coax cable, terminated with F-connectors, the same found in everyday cable and satellite TV systems. Compared to 400 coax, RG6 has more than twice the signal loss per foot, but it is also much thinner and easier for consumers to work with. (Homeowners who need long runs of cable might want to consider using RG11 coax cable with F-connectors; RG11 is more rigid and expensive than RG6, but has much lower signal loss.)

Single-room amplifiers often use RG58 coax cable with SMA-connectors. This is the thinnest cable for in-building systems. Because of its high signal loss (60% greater than RG6), it’s suitable only for the shortest runs.

Optional components

The four parts above are all that’s required for a complete cell phone signal amplifier system. Other components can protect or enhance a system:

  • A lightning surge protector insulates the amplifier against a sudden electrical surge from a lightning strike to the donor antenna.
  • Splitters and couplers divide the signal from an amplifier to two or more broadcast antennas, expanding the signal coverage inside your building. (These should only be used with commercial or large-home amplifiers, and where there is adequate outside signal.)
  • Attenuators can be used when the outside signal is so strong that it’s overwhelming the amplifier. (These should only be used with professionally-installed commercial amplifiers.)

FCC notice

This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.

Please note: The four largest carriers (Verizon, AT&T, T-Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.

If you have any questions, please contact Powerful Signal.

Prop 65 notice

Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Specifications

Small Office
Outside Signal 1 Bar:
Up to about 2,500 sq. ft.
Outside Signal 2–3 Bars:
Up to about 12,000 sq. ft.
Outside Signal 4–5 Bars:
Up to about 40,000 sq. ft. (with 3 antennas)
Outside antenna:
Omnidirectional cylinder (×1)
Inside antenna:
Omnidirectional dome (×1)
Cable Type:
Connector Type:
50 Ω
+70 dB max
Booster Case Material:
Signal Readout:
LCD display with output signal in dBM

Warranty Information

All WilsonPro products are protected by WilsonPro's 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. WilsonPro Signal Boosters are warranted for three (3) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option, either repair or replace the product. WilsonPro will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S. This warranty does not apply to any Signal Booster determined by WilsonPro to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.

Videos Hide Videos Show Videos