This system uses half-inch plenum air coax cable for use in commercial buildings with code requirements for fire-rated coax cable, or for customers who want the best possible performance from their Office PRO system. Half-inch plenum cable has the highest grade and performance, giving you better coverage and lower signal loss per foot than conventional 400-type coax cable.
Boosts 4G LTE and 3G service for voice, text, and data.
This Wilson Pro 70 Office PRO system is a four-antenna option designed for small offices or building areas that need improved cell signal reception and have low to moderate user and data demands. This system improves both voice and data to reduce dropped calls and missed emails and texts, keeping your business and employees connected with a stronger cell signal.
This kit includes four (4) inside dome antennas that send amplified signal to the phones in your office in four different areas. Four antennas are able to disperse evenly-boosted cell signal into 4 different zones. It is not necessarily four times the coverage, but rather more even coverage in a larger area.
This Office PRO system includes half-inch plenum air coax cable, pre-terminated with N-male connectors.
Plenum coax cable comes in different types, including (among many others) 400 plenum and half-inch plenum. Not all plenum cable performs the same way, though: Powerful Signal prefers half-inch plenum air because it meets commercial building codes and has superior performance.
Plenum air coax cable must be handled properly and not bent improperly or kinked. Like other coax cable with cell signal boosters, it is critical that no coils are left in the cable after installation. We recommend that you have a professional installer who is experienced with plenum cable set up your system.
Please Note: The diagrams below are only examples of four-antenna configurations. Additional coax cable may be required in the Wilson Pro 70 Office PRO kit to achieve the following setups in your building. Please contact us for help on cabling and coverage for this system in your office environment.
Sample Wilson Pro Office PRO multi-antenna setups
Using Wilson Electronics' patented SmarTech III® technology, the Wilson Pro 70 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office through the four inside dome antennas. This allows you to stay connected in areas where cell service is poor, or where your office's building materials interfere with signals from the local cell tower. (See the "More Information" tab for details.)
The Wilson Pro 70 Office Pro works with all major wireless carriers in the U.S. and Canada.
The following chart is based on mostly open interior space with no obstructions (walls, doors, etc.). Drywall, plaster, wood, concrete, steel, and stone all affect radio transmissions. Cell phones also operate in several different frequencies that penetrate obstructions differently. In general, the stronger the outside cell signal, the greater the interior broadcast distance. Please contact us if you have any questions about coverage for this booster.
These coverage area estimates have been calculated from industry standards and Powerful Signal's years of experience installing cellular amplification systems. Powerful Signal considers any figures from other retailers that exceed these to be inaccurate and unrealistic.
In an office environment, it's best to have your Wilson Pro system installed by a professional. A professional installer will have knowledge of local building codes, and have the proper tools and experience to make sure your system is set up and configured correctly. Contact Powerful Signal and we can arrange for one of our nationwide professional installers to give you a quote.
This is a complete kit, with everything you need to start getting the best signal in your office or large building.
A building cell phone signal amplifier system is made up of four major components:
The cell phone signal amplifier—sometimes called a booster—is the core component of the system.
The amplifier is bi-directional: It amplifies both the signal your phone receives from the tower and the signal your phone sends to the tower. A weak cell signal is received by the outside antenna and amplified by the booster; the strengthened signal is then rebroadcasted by the inside antenna to your phone. The amplifier also boosts the connection back to the cell tower. (There still has to be some cell signal for the booster to amplify, though; it cannot “multiply zero”).
The most convenient spot to place the cell phone signal amplifier is in an I.T. closet, network box, attic, or garage; this will keep it out of sight, but still accessible if you need to make any changes to the system. The location you select to install the amplifier needs to have a 110-volt AC wall outlet nearby (typically within 6 feet) to plug in the amplifier’s power supply.
The four parts above are all that’s required for a complete cell phone signal amplifier system. Other components can protect or enhance a system:
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note: The four largest carriers (Verizon, AT&T, T-Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.
If you have any questions, please contact Powerful Signal.
Warranty InformationAll WilsonPro products are protected by WilsonPro's 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. WilsonPro Signal Boosters are warranted for three (3) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option, either repair or replace the product. WilsonPro will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S. This warranty does not apply to any Signal Booster determined by WilsonPro to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.