Loading... Please wait...
  • Wilson Pro 70 Cell Phone Signal Booster System (2 Dome Antennas) 465134: Kit
  • Sample 2-dome antenna installation
  • Wilson Pro 70 Cell Phone Signal Booster System (2 Dome Antennas) 465134: Booster
  • 4G/3G Indoor Ceiling-Mount Omnidirectional Dome Antenna - 50 Ohm, N-Female (×2)
  • Wide-band omni exterior antenna
  • J-Pipe Building Antenna Mount
  • 2-Way Splitter
  • 400 Coax Cable w/N-Male to N-Male Connectors, 75 ft. (×1) + 30 ft. (×1) + 50 ft. (×3)
  • Lightning Surge Protector
  • AC Wall Outlet Power Supply

Wilson Pro 70 Cell Phone Signal Booster System (2 Dome Antennas) 465134

Availability:
In stock—fast shipping
    Feature Supports a moderate number of simultaneous users
    Feature 2 inside dome antennas
    Feature Commercial-grade components
    Feature Boost both voice & 4G data
    Feature Works with all major cellular carriers
    Usage Small Office
    Outside Signal 1 Bar Up to about 1,800 sq. ft.
    Outside Signal 2–3 Bars Up to about 10,000 sq. ft.
    Outside Signal 4–5 Bars Up to about 17,500 sq. ft.
    Outside antenna Omnidirectional dome (×1)
    Inside Antenna Omnidirectional dome (×2)
    Cable Type 400
    Connector Type N
    Impedance 50 Ω
    Gain/Loss +70 dB max
    Booster Case Material Metal
    Signal Readout LCD display with output signal in dBM
    Outside Signal Strength Coverage Area
    Qty:
      Brand:
      WilsonPro
      $1,199.99
      SKU: 465134-2
      Shipping:
      Free Shipping

      Wilson Pro 70 Cell Phone Signal Booster System (2 Dome Antennas) 465134

      Overview

      • Wilson Pro's most cost effective 2-antenna 4G cell phone signal booster system for small offices.
      • Low to moderate use load on cell phones and data
      • Carrier agnostic: Works with all major U.S. and Canadian carriers.
      • Boosts 4G LTE and 3G service for voice, text, and data.
      • Boosts cell signal in small offices for multiple users.
      • Includes commercial-grade antennas and coax cables.

      The Wilson Pro 70465134-2 is a two-antenna option designed for small rectangular shaped offices or in-building areas that need improved cell signal reception. This system improves both voice and data to reduce dropped calls and missed emails and texts. Keep your business and employees connected with a stronger cell signal.

      This kit includes two (2) inside dome antennas that send amplified signal to the cell phones in your office.

      Wilson Pro 70 sample 2 antenna setup

      Sample 2-antenna setup

      Who is this for?

      • Those who have moderate cellular user and data loads.
      • Those who frequently experience dropped calls, undelivered text, or slow 4G data.
      • Small offices in remote locations with weak cell service.
      • Small offices in urban locations with building materials that block outside cell signal (steel, glass, concrete, plaster, etc.).
      • Small offices below ground level, and other places where cell reception is poor.

      How it works

      Using Wilson Electronics' patented SmarTech III® technology, the Wilson Pro 70 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office. This allows you to stay connected in areas where cell service is poor, or where your office's building materials interfere with signals from the local cell tower. (See the "More Information" tab for details.)

      Works with all major cellular carriers

      The Wilson Pro 70 works with all major wireless carriers in the U.S. and Canada.

      • U.S. carriers, including Verizon, AT&T, T-Mobile, Sprint, U.S. Cellular, and most others.
      • Canadian carriers, including Rogers, Bell Canada, Telus, Wind, and most others.

      How much area will this product cover?

      Under moderate and strong outside signal situations, this 2 antenna system covers significantly more than a single antenna system. The following chart is based on open interior space with no obstructions (walls, doors, etc.). Drywall, plaster, wood, concrete, steel, and stone all affect radio transmissions. Cell phones also operate in several different frequencies that penetrate obstructions differently. In general, the stronger the outside cell signal, the greater the interior broadcast distance. Please contact us if you have any questions about coverage for this booster.

      Outside signal strength
      Approximate coverage area
      Weak (−100 dBm)
      Up to 1,800 sq ft
      Moderate (−90 dBm)
      Up to 10,000 sq ft
      Strong (−80 dBm)
      Up to 17,500 sq ft

      These coverage area estimates have been calculated from industry standards and Powerful Signal's years of experience installing cellular amplification systems. Powerful Signal considers any figures from other retailers that exceed these to be inaccurate and unrealistic.

      Installation

      In an office environment, it's best to have your Wilson Pro system installed by a professional. A professional installer will have knowledge of local building codes, and have the proper tools and experience to make sure your system is set up and configured correctly. Contact Powerful Signal and we can arrange for one of our nationwide professional installers to give you a quote.

      Package includes

      This is a complete kit, with everything you need to start getting the best signal in your office or other large building.

      • 1 × Wilson Pro 70 465134 cell phone signal booster.
      • 1 × AC wall outlet power supply.
      • 1 × wide-band outdoor omni antenna.
      • 2 × wide-band indoor dome antennas.
      • 1 × 2-way splitter.
      • 1 × 75' 400 coax cable (connects outdoor antenna to booster).
      • 2 × 50' 400 coax cables (connect splitter to indoor antennas).
      • 1 × 30' 400 coax cable (connects booster to splitter).
      • 1 × universal j-pipe mount (for outdoor antenna).
      • 1 × lightning surge protector.
      • Wilson Pro 70 465134 install guide.

      How does a building cell phone signal booster work?

      A building cell phone signal amplifier system is made up of four major components:

      1. A cell phone signal amplifier and power supply.
      2. An outside donor antenna.
      3. An inside broadcast antenna.
      4. Coax cables that connect the antennas to the amplifier.

      Cell phone signal amplifier

      The cell phone signal amplifier—sometimes called a booster—is the core component of the system.

      The amplifier is bi-directional: It amplifies both the signal your phone receives from the tower and the signal your phone sends to the tower. A weak cell signal is received by the outside antenna and amplified by the booster; the strengthened signal is then rebroadcasted by the inside antenna to your phone. The amplifier also boosts the connection back to the cell tower. (There still has to be some cell signal for the booster to amplify, though; it cannot “multiply zero”).

      The most convenient spot to place the cell phone signal amplifier is in an I.T. closet, network box, attic, or garage; this will keep it out of sight, but still accessible if you need to make any changes to the system. The location you select to install the amplifier needs to have a 110-volt AC wall outlet nearby (typically within 6 feet) to plug in the amplifier’s power supply.

      Directional and omnidirectional antennas

      Donor antennas: directional (left) and omnidirectional (right).

      Outside donor antenna

      The donor antenna communicates with your wireless carrier’s cell tower. It’s typically mounted on a pole on the roof of the building, clear of any surrounding obstacles.

      Some donor antennas are directional, meaning they need to be pointed toward the strongest nearby cell tower. Typically you’ll choose a directional antenna if your building is in a remote location with one distant cell tower providing weak outside signal.

      An omnidirectional antenna picks up signals from multiple cell towers in different directions. Usually you’ll choose an omni antenna if your building is in an area with several surrounding towers, and especially if you have plenty of outside cell signal that just isn’t penetrating inside your building.

      The outside antenna needs to be placed with adequate separation from the inside antenna(s), and, if you’re using a directional antenna, not pointing toward your inside antenna(s) so their signals overlap. Without adequate separation, the outside and inside antennas may conflict with each other (a condition known as oscillation), which will cause the amplifier to reset or shut itself off.

      For more information about choosing the right donor antenna, see our blog entry, “Directional or omnidirectional: Which antenna is best?

      Panel and dome antennas

      Broadcast antennas: panel (left) and dome (right).

      Inside broadcast antenna

      The broadcast antenna communicates with cell phones inside the building. It’s typically mounted on a ceiling or a wall.

      A dome antenna is mounted on the ceiling, and broadcasts its signal downward in a 360° pattern. Domes work best in situations where the ceiling is level with the floor (not angled), low enough to be reached with a ladder, and where there is access above the ceiling to attach coax cable to the antenna. Domes typically provide the best signal coverage, and are also less noticeable than panel antennas.

      A panel antenna is mounted on a wall, and broadcasts its signal forward, away from the panel, in a beam 60–70° wide. Panels work best in situations where a dome antenna is not easy to install or would not be horizontal to the floor, or where pulling cable through walls and ceilings is not an option. Panels can be concealed in recessed areas behind drywall.

      Basic cell phone signal amplifier kits usually include one broadcast antenna. Larger, more complex buildings with custom-designed systems have multiple inside broadcast antennas that cover more area.

      400, RG6, and RG58 coax cable

      Terminated coax cable: 400 cable with N‑connector (left), RG6 cable with F‑connector (middle), RG58 cable with SMA‑connector (right).

      Coax cable

      Lengths of coax cable connect the donor antenna and the broadcast antenna(s) to the cell phone signal amplifier.

      Any signal sent through a cable is going to result in attenuation (signal loss). Since the objective of installing a cell phone signal amplifier system is to increase signal, the length and type of cable in the system is an important consideration.

      Commercial and large-home systems use 400-type coax cable or plenum coax cable, terminated with N‑connectors. These cables are very thick and have very low signal loss, which makes them ideal for long runs from the amplifier to the antenna (sometimes hundreds of feet). They are, however, very rigid, so they’re not well-suited for use around corners and in tight spaces. These types of cables are often used by professional installers.

      Small home amplifer systems typically use RG6 coax cable, terminated with F‑connectors, the same found in everyday cable and satellite TV systems. Compared to 400 coax, RG6 has more than twice the signal loss per foot, but it is also much thinner and easier for consumers to work with. (Homeowners who need long runs of cable might want to consider using RG11 coax cable with F‑connectors; RG11 is more rigid and expensive than RG6, but has much lower signal loss.)

      Single-room amplifiers often use RG58 coax cable with SMA‑connectors. This is the thinnest cable for in-building systems. Because of its high signal loss (60% greater than RG6), it’s suitable only for the shortest runs.

      Optional components

      The four parts above are all that’s required for a complete cell phone signal amplifier system. Other components can protect or enhance a system:

      • A lightning surge protector insulates the amplifier against a sudden electrical surge from a lightning strike to the donor antenna.
      • Splitters and couplers divide the signal from an amplifier to two or more broadcast antennas, expanding the signal coverage inside your building. (These should only be used with commercial or large-home amplifiers, and where there is adequate outside signal.)
      • Attenuators can be used when the outside signal is so strong that it’s overwhelming the amplifier. (These should only be used with professionally-installed commercial amplifiers.)

      Notice

      This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.

      Please note: The four largest carriers (Verizon, AT&T, T-Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.

      If you have any questions, please contact Powerful Signal.

      Feature Supports a moderate number of simultaneous users
      Feature 2 inside dome antennas
      Feature Commercial-grade components
      Feature Boost both voice & 4G data
      Feature Works with all major cellular carriers
      Usage Small Office
      Outside Signal 1 Bar Up to about 1,800 sq. ft.
      Outside Signal 2–3 Bars Up to about 10,000 sq. ft.
      Outside Signal 4–5 Bars Up to about 17,500 sq. ft.
      Outside antenna Omnidirectional dome (×1)
      Inside Antenna Omnidirectional dome (×2)
      Cable Type 400
      Connector Type N
      Impedance 50 Ω
      Gain/Loss +70 dB max
      Booster Case Material Metal
      Signal Readout LCD display with output signal in dBM
      Wilson Pro 70 Plus Cell Phone Booster for Large Buildings (01:59)
      Introducing the Wilson Pro 70 Plus - Professional Grade Cell Signal Booster System from: http://powerfulsignal.com/wilsonpro-cell-signal-boosters.aspx Powerful Signal is a full service supplier with direct relations with Wilson Electronics. Below is what you can expect from Powerful Signal. • Designing and supplying building cellular systems since 2006 • Full Service, sales, technical support, and warranty returns • System design for small or large systems • Product experience and knowledge Powerful Signal has been working with Wilson Electronics and their products for 10 years. We know the business and how to successfully support you. The WilsonPro 70 Plus provides the maximum 4G performance power of any competing solution available on the market today. Bring a strong 3G/4G voice and data signal into your building. Keep your business connected by eliminating dropped calls, missed emails and text messages. Maximum downlink (interior broadcast) allows for more expansive indoor signal coverage area. Extensive tests done by independent labs prove Wilson professional grade cell signal boosters provide an indoor coverage area up to 6 times larger than what is provided by competing boosters. Wilson Electronics professional grade series boosters out perform the competition by delivering: • Higher uplink (phone-to-tower) power for higher user capacity and greater calling range. • Higher downlink (tower-to phone) power for more expansive indoor coverage area. • Lower noise for cleaner voice and data signal The WilsonPro 70 Plus uses a built-in uplink and downlink power meter that graphically displays current signal readings of the major bands supported; Cellular, PCS, Verizon LTE, AT&T LTE, and AWS. This meter provides the ability to assist with exterior donor antenna positioning by displaying signal strength as antennas are adjusted, thus helping to locate the best possible direction for directional antennas. Wilson Electronics has created a line of cell signal boosters targeted towards commercial and large application use. The WilsonPro series outperform competitive manufactures in performace and coverage area. • Industry-leading 3 year warranty • Lower Cost per square foot of coverage • Typically less than 10% of the cost of DAS or 50% of the cost of picocell • Don't require any Internet connection • Supports all major carriers • Less implimentation time • Professionally designed • Lifetime customer support • Non-proprietary components • Best-in-Class system design • Designed, Assembled, and Supported in the USA Contact Powerful Signal for your custom designed complete signal solution.
      • Wilson Pro 70 Plus Cell Phone Booster for Large Buildings
        Introducing the Wilson Pro 70 Plus - Professional Grade Cell S...

      This product hasn't received any reviews yet. Be the first to review this product!

      Write your own product review

      All WilsonPro products are protected by WilsonPro's 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase.

      WilsonPro Signal Boosters are warranted for three (3) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.

      Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro.

      WilsonPro shall, at its option, either repair or replace the product. WilsonPro will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.

      This warranty does not apply to any Signal Booster determined by WilsonPro to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.

      Sign up for our newsletter

      View Cart Go To Checkout