Call for pricing: 866-912-3444
The WilsonPro 1100 is Wilson Electronics’ next-generation professional-grade cell signal amplifier for medium-sized and large buildings. The Pro 1100 has all the features and more of the WilsonPro 1000, but is one-quarter the size and less than half the price of the previous model.
The Pro 11000 is a wall-mounted, single-amplifier system that can cover 25,000 to 35,000 square feet with one inside broadcast antenna (with sufficient outside signal strength). Its inside antenna port can also be split to support up to four broadcast antennas for improved cellular coverage in multiple areas of your building.
The WilsonPro 1100’s on-board software continuously monitors and and adjusts the amplfier’s gain level, as needed. With Wilson’s patented XDR (eXtended Dynamic Range) technology, the Pro 1100 will never overpower or shut down or experience oscillation between the inside and outside antennas.
The color LCD touch screen allow installers and administrators to monitor gain on each cellular band and disable specific bands, if needed.
The WilsonPro 1100 receives available outside cell signal, amplifies it, and rebroadcasts it inside your building. This allows you to stay connected in areas where cell service is poor, or where your building’s construction materials interfere with signals from local cell towers.
The WilsonPro 1100 works with all major wireless carriers, including Verizon, AT&T, T‑Mobile, Sprint, U.S. Cellular, and most others.
The following chart is based on open interior space with no obstructions (walls, doors, etc.). Drywall, plaster, wood, concrete, steel, and stone all affect radio transmissions. Cell phones also operate in several different frequencies that penetrate obstructions differently. In general, the stronger the outside cell signal, the greater the inside broadcast distance. Please contact us if you have any questions about coverage for this booster.
These coverage area estimates have been calculated from industry standards and Powerful Signal's years of experience installing cellular amplification systems. Powerful Signal considers any figures from other retailers that exceed these to be inaccurate and unrealistic.
In an office environment, it's best to have your Wilson Pro system installed by a professional. A professional installer will have knowledge of local building codes, and have the proper tools and experience to make sure your system is set up and configured correctly. Contact Powerful Signal and we can arrange for one of our nationwide professional installers to give you a quote.
This is a complete kit, with everything you need to start getting the best signal in your office or other large building.
A building cell phone signal amplifier system is made up of four major components:
The cell phone signal amplifier—sometimes called a booster—is the core component of the system.
The amplifier is bi-directional: It amplifies both the signal your phone receives from the tower and the signal your phone sends to the tower. A weak cell signal is received by the outside antenna and amplified by the booster; the strengthened signal is then rebroadcasted by the inside antenna to your phone. The amplifier also boosts the connection back to the cell tower. (There still has to be some cell signal for the booster to amplify, though; it cannot “multiply zero”).
The most convenient spot to place the cell phone signal amplifier is in an I.T. closet, network box, attic, or garage; this will keep it out of sight, but still accessible if you need to make any changes to the system. The location you select to install the amplifier needs to have a 110-volt AC wall outlet nearby (typically within 6 feet) to plug in the amplifier’s power supply.
The four parts above are all that’s required for a complete cell phone signal amplifier system. Other components can protect or enhance a system:
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note: The four largest carriers (Verizon, AT&T, T-Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.
If you have any questions, please contact Powerful Signal.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty InformationAll WilsonPro products are protected by WilsonPro's 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. WilsonPro Signal Boosters are warranted for three (3) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option, either repair or replace the product. WilsonPro will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S. This warranty does not apply to any Signal Booster determined by WilsonPro to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties. Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.